Adhesive Thin Metal Plates S-07N (Black) review

?Are you thinking about adding a magnetic-friendly plate to your phone setup but unsure how the “Adhesive Thin Metal Plates(Compatible with Magnetic Mounts),4 Piece Metal Plates for Phone Case(2 Rectangle and 2 Round) S-07N(Black)” will fit into your daily routine?

Quick Product Overview

You get four thin metal plates: two rectangular plates (4.5 cm x 6.5 cm) and two round plates (diameter 4 cm). They’re adhesive-backed, designed to be compatible with magnetic mounts, and intended to be used on the outside or between your phone and its case. This section gives a short snapshot of what you should expect right away.

What the product claims

The plates are described as spare parts compatible with magnetic mounts rather than containing magnets themselves. The adhesive is marketed as strong enough to hold your device stable during driving. You’re told that placing a metal plate where you want to charge wirelessly can interfere with charging, so placement matters.

What’s Inside the Package

You’ll find two rectangular metal plates and two round metal plates in black finish. That’s it—no extra magnets, screws, or mounting hardware. The simplicity means you can start using them right away, but it also means the product relies on whatever magnetic mount you already own.

How this affects you

Because the package only includes metal plates with adhesive, you must already own or purchase a magnetic mount separately. If you prefer a full kit, this product won’t replace a mounting base. On the upside, you can choose where to place the plates and use different shapes based on your phone or case design.

Key Specifications (At-a-glance)

This table breaks down the important specs so you can quickly decide whether this product will work for you.

Feature	Specification
Product Name	Adhesive Thin Metal Plates(Compatible with Magnetic Mounts),4 Piece Metal Plates for Phone Case(2 Rectangle and 2 Round) S-07N(Black)
Quantity	4 pieces (2 rectangular, 2 round)
Rectangular Plate Size	4.5 cm x 6.5 cm
Round Plate Diameter	4 cm
Color	Black
Adhesive	Pre-applied strong adhesive
Magnet Included?	No (plates are metal only)
Intended Use	Use with magnetic mounts; stick to phone or between phone and case
Wireless Charging Impact	May disable wireless charging if placed in charging path
Typical Applications	Car mounts, desk mounts, wall mounts, home use

How to use this table

You can use this table to compare these plates to other metal plates you might own. Pay attention to dimensions and color so you don’t end up with a plate that’s too large for your case or too conspicuous against your phone’s finish.

First Impressions and Packaging

When you first open the pack, you’ll notice the plates are slim and unobtrusive. The black finish looks neat against most phone colors, and the adhesive strip feels sturdy. Packaging is generally straightforward—just a small blister or envelope—so you won’t get a premium unboxing, but you also won’t have a lot of waste.

What matters to you here

If you value minimalism and functionality over presentation, this will be fine. If you expect premium packaging or additional accessories like alignment tools, you might be disappointed. The important thing is whether the plates perform, not how they come wrapped.

Design and Build Quality

The plates are thin metal with a matte black finish designed to blend with cases. Their thin profile keeps them discreet when you stick them to a phone or slip them under a case. The rectangular size gives more surface area for mounting, while the round plates offer a less obtrusive look for smaller phones or specific strap locations.

How this impacts daily use

You’ll appreciate the thinness if you pocket your phone frequently. The metal surface is durable and resists bending in normal use. However, because these are thin, you won’t get structural reinforcement—just the metal needed to interact with a magnetic mount.

Adhesion and Installation

The adhesive is pre-applied, which makes installation a one-step process: peel and stick. You can attach a plate directly to the phone or put it between the phone and the case. If you choose to stick directly to your device, make sure the surface is clean and dry for best results.

Installation tips you’ll find useful

• Clean the area with isopropyl alcohol first to remove oils and dust.
• Press firmly for 30 seconds to activate adhesion.
• Wait at least 24 hours after installation before using heavy or high-vibration mounts to ensure maximum bond strength.

Compatibility with Magnetic Mounts

Because these plates are metal-only, they’re designed to work with mounts that use magnets (neodymium or ferrite) to hold devices. They don’t contain magnets themselves, so you rely on the magnet strength of your mount to secure your phone.

Points to consider when choosing a mount

• Stronger mounts will hold better with these plates; cheap mounts with weak magnets could let the device slip.
• Plate placement affects balance—center placement usually works best for many mounts.
• If you use multiple plates, they can sometimes improve stability when used with a larger mounting surface.

Wireless Charging Considerations

One crucial point: metal plates can interfere with wireless charging by blocking the electromagnetic field required for Qi charging. If you want to use wireless charging, you’ll need to place the plate away from the charging coil area or remove the plate during charging.

Practical advice for keeping wireless charging functional

• Identify where your phone’s wireless charging coil is (often centered).
• Place the metal plate off-center or put the plate between the phone and the case but not directly over the coil.
• Consider using a magnetic ring or specifically designed wireless-compatible plates if wireless charging is essential to you.

Performance in a Vehicle

In a car, these plates can make your phone extremely convenient to use hands-free, especially with a strong magnetic mount. If you attach a rectangular plate, you’ll typically get more contact area and potentially better hold. Round plates are good for aesthetic or smaller phones.

What to expect during driving

• On smooth roads or normal city driving, the plates combined with a decent magnet will hold the phone steady.
• On very rough roads or during extreme maneuvers, you may notice some movement depending on mount strength and plate position.
• Always test your setup on short trips to ensure the phone remains secure.

Using with Cases: Thin vs Thick

You can stick the plate to the outside of a thin case or place it between a phone and a thin-to-medium case. Thick, rugged cases will sometimes reduce magnetic pull because the thicker material increases the gap between the metal plate and the mount’s magnet.

How you should decide where to place it

• If you have a slim case, placing the plate between the phone and the case gives a clean look and maintains adhesion.
• For thicker cases, stick the plate on the outside for reliable mounting.
• If you worry about damaging a case, put the plate between the phone and the case, but ensure the case still sits flush.

Durability and Wear Over Time

The metal itself is resilient; scratches are possible but unlikely to affect performance. The adhesive is the component most likely to show wear. Over time and with exposure to heat (like inside a car), adhesives can lose grip and may need replacement.

How to maximize longevity

• Avoid exposing the adhesive to excessive heat or moisture during the initial bonding period.
• Refrain from frequently removing and reapplying the plate—adhesives weaken with repeated use.
• If the adhesive fails, you can replace it with automotive-grade double-sided tape or specialized adhesive pads.

Safety and Removal

Removing the plate is straightforward but may require care if it was stuck directly to a phone’s finish. Use slow, steady force and a hairdryer at low heat to soften the adhesive if needed. If you stick the plate to the phone, you might leave adhesive residue which can be cleaned with isopropyl alcohol.

Removal steps for minimal damage

• Heat the adhesive area gently to soften the glue.
• Use dental floss or a thin pry tool to lift the plate slowly.
• Clean residual adhesive with alcohol and a microfiber cloth.

Aesthetics and Finish

The black finish is subtle and generally works with a wide range of phone colors. The rectangular plates are more visible than the round ones, but if you position them under a case they become invisible. The slim profile minimizes added bulk.

How this affects your phone’s look

You’ll find the plates unobtrusive if they’re under a case or if you choose the round ones for less visual impact. If aesthetics matter a lot to you, consider color-matching or placing the plate where it won’t be seen.

Practical Scenarios and Use Cases

You can use these plates with dashboard mounts, vent mounts, desk mounts, or wall mounts. They’re helpful if you frequently use your phone for navigation, hands-free calls, or as a media device in the car. They’re also handy for mounting your phone on a fridge or metal surface at home using a magnetic hook.

Everyday benefits you’ll notice

• Easier single-handed mounting and removal.
• Quick access while driving without fumbling with clamps.
• A neater setup when using multiple mounts around the house or office.

Alternatives and Comparisons

Compared to magnetic cases with built-in magnets, these plates are more flexible—you can place them where you need without replacing a case. Compared to adhesive mounts that require screws or clamps, they are less permanent and easier to remove.

When to choose these plates over alternatives

• If you have multiple devices and want plates you can move between phones or cases.
• If you prefer to keep your current case and add magnetic compatibility.
• If you need a low-cost solution rather than buying a dedicated magnetic case.

Pros and Cons

You’ll want to weigh the benefits against limitations before buying. Here’s a clear list to help you decide.

Pros

• Thin and low-profile, minimizing bulk.
• Includes both rectangular and round plates for flexibility.
• Strong adhesive for reliable mounting under typical conditions.
• Inexpensive way to add magnetic compatibility to existing setups.

Cons

• No magnets included—requires a magnetic mount you already own or must buy.
• Can interfere with wireless charging if placed over coil area.
• Adhesive may weaken over time, especially under heat.
• Direct mounting to premium phone backs could risk residue or minor surface issues.

Tips for Best Results

Use these practical tips to get the most out of your metal plates.

• Clean surfaces thoroughly before attaching.
• Press firmly and allow time for the adhesive to cure.
• Avoid placing plates over wireless charging areas.
• Use rectangular plates for larger phones or when you need more surface contact.
• Test your setup with short drives before relying on it during long trips.

Maintenance and Care

You don’t need to do much to maintain the plates, but occasional checks help. Inspect the adhesive bond every few months, especially if you keep the phone in a hot car. Replace or re-adhere plates if you notice loosening.

Small care steps that help

• Keep plates dry and avoid submerging them.
• If dirt accumulates, gently wipe with a damp cloth—avoid harsh chemicals.
• If you change cases often, consider keeping an extra pair of plates for swapping.

Environmental and Safety Considerations

The plates are small and contain metal and adhesives that should not be exposed to extreme environments. Dispose of them following local electronic waste guidelines if you no longer need them.

Safety reminders for you

• Don’t place plates near medical devices like pacemakers.
• Avoid putting plates such that they interfere with vehicle sensors or key fobs.
• Keep out of reach of children who might swallow small components.

Ideal Users for This Product

These plates are best for people who already own a magnetic mount or those who want to convert an existing mount to fit another device. They work well for commuters, drivers who use navigation frequently, and people who like tidy desk setups.

Why you might be the right user

You’ll appreciate the low cost and flexibility if you switch cases or phones regularly but want magnetic mounting capability. If you value a simple, unobtrusive solution rather than a fully integrated magnetic case, these plates could be ideal.

Frequently Asked Questions (FAQ)

This short FAQ addresses common things you’ll likely ask.

• Will these plates damage my phone?
  • If used carefully and removed properly, they shouldn’t cause permanent damage. You may get adhesive residue or minor cosmetic changes.
• Can I use them with wireless charging?
  • You can, but you must avoid placing the plate over the wireless charging coil or remove the plate before charging.
• How strong is the adhesive?
  • It’s designed to be strong for typical driving conditions, but strength can vary with temperature and surface cleanliness.
• Can I use both rectangular and round plates simultaneously?
  • Yes, you can use multiple plates on a single device if the mount and design benefits from added contact area.

Final Verdict

If you need a simple, affordable way to add magnetic compatibility to your phone or case, the Adhesive Thin Metal Plates(Compatible with Magnetic Mounts),4 Piece Metal Plates for Phone Case(2 Rectangle and 2 Round) S-07N(Black) delivers practical value. You’ll enjoy the thin design, color that blends with modern devices, and flexibility from getting both rectangular and round options. Be mindful about wireless charging interference, adhesive longevity, and the need for an existing magnetic mount.

Who should buy this

Buy this if you want a low-cost, flexible option to pair with magnetic mounts and don’t mind managing plate placement to preserve wireless charging. Skip it if you want a fully integrated magnetic case or if you frequently change mount manufacturers and want a different mounting approach.

Buying Advice and Final Tips

Before you purchase, consider where you’ll use the plates most (car, desk, home) and whether you’ll rely on wireless charging. Look at your current case thickness and test placement with a temporary tape to find the best spot. Keep a small bottle of isopropyl alcohol, a microfiber cloth, and a hairdryer handy for installation and eventual removal.

Closing note for practical use

You’ll find the plates easy to work with and helpful for quick hands-free mounting. With proper placement and a suitable magnetic mount, they’ll make everyday tasks—like navigation and hands-free calling—more convenient while keeping your phone setup minimal and tidy.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.